Novastar TB30 TB40 TB50 TB60 LED Multimedia Player
Novastar's latest LED display multimedia player, Taurus TB series includes TB30, TB40, TB50 and TB60. (TB30 to replace TB3, TB40 to replace TB4, TB50 to replace TB6, TB60 to replace TB8). TB30 supports 0.65 million pixels. TB40 and TB50 support 1.3 million pixels. TB60 supports 2.3 million pixels.
TB30 Features:
· Loading capacity of up to 650,000 pixels with a maximum width of 4096 pixels and a maximum height of 4096 pixels;
· 2 x Gigabit Ethernet outputs with one master port and one backup port by default. Both the Ethernet ports can also be set as master ports;
· 1 x Stereo audio output;
· 1 x USB 2.0 port, supporting USB playback;
· On-board brightness sensor connector, allowing for automatic and scheduled smart brightness adjustment;
· Synchronous playback across multiple screens.
· Powerful processing capability
− Quad-core ARM A55 processor @ 1.8 GHz
− Hardware decoding and playback of H.265 4K HD videos
− Hardware decoding of 1080p videos
− 1 GB of RAM
− 16 GB of internal storage
− All-round control scheme
− Solution publishing and screen control via user terminal devices such as PC, mobile phone, and tablet
− Clustered remote solution publishing and screen control
− Clustered remote screen status monitoring
· Redundancy
− Network redundancy: The TB30 connects to the Internet via a wired network or 4G network according to the priority, making the network more stable.
− Ethernet port redundancy: One master Ethernet port and one backup Ethernet port are used for output. This redundancy mechanism increases transmission reliability.
TB40 Features:
Output
Loading capacity: up to 1,300,000 pixels
Maximum width: 4096 pixels
Maximum height: 4096 pixels
2 x Gigabit Ethernet ports
These two ports serve as primary by default.
Users can also set one as primary and the other as a backup.
1 x Stereo audio connector
The audio sample rate of the internal source is fixed at 48 kHz. The audio sample rate of the external source supports 32 kHz, 44.1 kHz, or 48 kHz. If NovaStar’s multifunction card is used for audio output, audio with a sample rate of 48 kHz is required.
1x HDMI 1.4 connector
Maximum output: 1080p@60Hz, support for HDMI loop
Input
1x HDMI 1.4 connector
In synchronous mode, video sources input from this connector can be scaled to fit the entire screen automatically.
2x sensor connectors
Connect to brightness sensors or temperature and humidity sensors.
Control
1x USB 3.0 (Type A) port
Allows for playback of content imported from a
USB drive and firmware upgrade over USB.
1x USB (Type B) port
Reserved
1x Gigabit Ethernet port
Connects to a LAN, public network, or computer for content release and screen control.
Performance
Powerful processing capacity
− Quad-core ARM A55 processor @1.8 GHz
− Support for H.264/H.265 4K@60Hz video decoding
− 1 GB of onboard RAM
− 16 GB of internal storage
Flawless playback
2x 4K, 6x 1080p, 10x 720p, or 20x 360p video playback
Functions
All-round control plans
− Enables users to publish content and control screens from a computer, mobile phone, or tablet.
− Allows users to publish content and control screens from anywhere, anytime.
− Allows users to monitor screens from anywhere, anytime.
Switching between Wi-Fi AP and Wi-Fi STA
− In Wi-Fi AP mode, the user terminal connects to the built-in Wi-Fi hotspot of the TB40. The default SSID is “AP+Last 8
digits of SN” and the default password is“12345678”.
− In Wi-Fi STA mode, the user terminal and the TB40 are connected to the Wi-Fi hotspot of a router.
Synchronous and asynchronous modes
− In asynchronous mode, the internal video source works.
− In synchronous mode, the video source input from the HDMI connector works.
Synchronous playback across multiple screens
− NTP time synchronization
− GPS time synchronization (The specified
4G module must be installed.)
Support for 4G modules
The TB40 ships without a 4G module. Users have to purchase 4G modules separately if needed.
Network connection priority: Wired network > WiFi network > 4G network
When multiple types of networks are available, the TB40 will choose a signal automatically according to the priority.
TB50 Features:
Output
Loading capacity of up to 1,300,000 pixels
Maximum width: 4096 pixels
Maximum height: 4096 pixels
2x Gigabit Ethernet ports
These two ports serve as primary by default.
Users can also set one as primary and the other as backup.
1x Stereo audio connector
The audio sample rate of the internal source is fixed at 48 kHz. The audio sample rate of the external source supports 32 kHz, 44.1 kHz, or 48 kHz. If NovaStar's multifunction card is used for audio output, audio with a sample rate of 48 kHz is required.
1 x HDMI 1.4 connector
Maximum output: 1080p@60Hz, support for HDMI loop
Input
1 x HDMI 1.4 connector
In synchronous mode, video sources input from this connector can be scaled to fit the whole LED screen automatically.
2 x sensor connectors
Connect to brightness sensors or temperature and humidity sensors.
Control
1 x USB 3.0 (Type A) port
Allows for playback of content imported from a USB drive and firmware upgrade over USB.
1 x USB (Type B) port
1 x USB (Type B) port
Reserved
1x Gigabit Ethernet port
Connects to a LAN, public network, or computer for content publishing and screen control.
Performance
Powerful processing capacity
− Quad-core ARM A55 processor @1.8 GHz
− Support for H.264/H.265 4K@60Hz video decoding
− 1 GB of onboard RAM
− 16 GB of internal storage
Flawless playback
1 x 4K video playback or 2x 1080p video playback
Function
All-round control plans
− Enables users to publish content and
control screens from a computer, mobile phone, or tablet.
− Allows users to publish content and control screens from anywhere, anytime.
− Allows users to monitor screens from anywhere, anytime.
Switching between Wi-Fi AP and Wi-Fi STA
− In Wi-Fi AP mode, the user terminal connects to the built-in Wi-Fi hotspot of the TB50. The default SSID is “AP+Last 8 digits of SN” and the default password is 12345678.
− In Wi-Fi STA mode, the user terminal and the T50 are connected to the Wi-Fi hotspot of a router.
Synchronous and asynchronous modes
− In asynchronous mode, the internal video source works.
− In synchronous mode, the video source input from the HDMI connector works.
Synchronous playback across multiple screens
− NTP time synchronization
− GPS time synchronization (The specified 4G module must be installed.)
− RF time synchronization (The specified RF module must be installed.)
Support for 4G modules
The TB50 ships without a 4G module. Users have to purchase 4G modules separately if needed.
Network connection priority: Wired network > WiFi network > 4G network When multiple types of networks are available, the TB50 will choose a signal automatically according to the priority.
TB60 Features:
Output
Loading capacity: up to 2,300,000 pixels
Maximum width: 4096 pixels
Maximum height: 4096 pixels
4x Gigabit Ethernet ports
All these four ports serve as primary by default.
Users can also set two as primary and the other two as backup.
1x Stereo audio connector
The audio sample rate of the internal source is fixed at 48 kHz. The audio sample rate of the external source supports 32 kHz, 44.1 kHz, or 48 kHz. If NovaStar’s multifunction card is used for audio output, audio with a sample rate of 48 kHz is required.
1x HDMI 1.4 connector
Maximum output: 1080p@60Hz, support for HDMI loop
Input
1x HDMI 1.4 connector
In synchronous mode, video sources input from this connector can be scaled to fit the entire screen automatically.
2x sensor connectors
Connect to brightness sensors or temperature and humidity sensors.
Control
1x USB 3.0 (Type A) port
Supports playback of content imported from a USB drive and firmware upgrade over USB.
1x USB (Type B) port
Reserved
1x Gigabit Ethernet port
Connects to a LAN, public network, or computer for content publishing and screen control.
Performance
Powerful processing capacity
− Quad-core ARM A55 processor @1.8 GHz
− Support for H.264/H.265 4K@60Hz video decoding
− 1 GB of onboard RAM
− 16 GB of internal storage
Flawless playback
2x 4K, 6x 1080p, 10x 720p, or 20x 360p video playback
Function
All-round control plans
− Enables users to publish content and control screens from a computer, mobile phone, or tablet.
− Allows users to publish content and control screens from anywhere, anytime.
− Allows users to monitor screens from anywhere, anytime.
Switching between Wi-Fi AP and Wi-Fi STA
− In Wi-Fi AP mode, the user terminal connects to the built-in Wi-Fi hotspot of the TB60. The default SSID is “AP+Last 8 digits of SN” and the default password is“12345678”.
(0)
(0)
(0)
(0)
(0)
